| Nr. |
Filename |
Date |
Size |
Downloads |
Description |
| 251 |
run_080.zip |
02-06-2009 |
24 Kb. |
0 |
RUN! v0.80 - (C) Copyright 2003-2009 R L Walsh.
All Rights Reserved. All Rights Reserved. RUN!
can eliminate scripts and config.sys entries
needed to start many programs - particularly
those started as 'helper-apps' by other
programs. It sets the current drive, directory,
and BeginLibPath to the directory containing the
.exe, sets any options you've chosen, then
starts the program. RUN! is freeware. |
| 252 |
safcpy17.zip |
20-04-2014 |
60 Kb. |
0 |
Safecopy 1.7. Copyright 2012 CorvusCorax.
Safecopy is a data recovery tool. It tries to
get as much data from the source as possible,
even resorting to device specific low level
operations if applicable. Additional
requirements: GCC runtime (0.6.5) |
| 253 |
scsimon.zip |
19-07-2006 |
84 Kb. |
0 |
scsimon 0.0.2 SCSI hdd monitoring tool for os/2.
SCSIMON is a simple command line tool to show
status for you SCSI HDD. It prints out HDD
model, revision, manufacture date, start/stop
count, drive temperature and error counters and
log. Additional requirements: aspinkk.sys |
| 254 |
scu10.zip |
13-04-2011 |
53 Kb. |
0 |
SCU - System Customization Utility. This program
allows you to copy your system customizations to
a saved location, and then copy them back to
another system. It assumes, and requires, that
the disk layout and directory structure is the
same between the old system and the new system.
It also assumes that your boot drive is used
only for storing the operating system and that
all third party programs and data are stored on
a different drive. |
| 255 |
servinst.zip |
26-02-2018 |
57 Kb. |
0 |
LAN Server Installation GUI. Copyright (C)
2005-2018 Alexander Taylor. All rights reserved.
This is a straightforward installation program
for IBM LAN Server for OS/2. |
| 256 |
setmbr20.zip |
14-09-2004 |
4 Kb. |
0 |
Provides a set of programs to
backup/restore/wipeout the master boot record of
physical disks present in or attached to an OS/2
system. It has been specifically designed to
allow partitioning of a USB memory stick under
OS/2. Made in Holland by Wim Brul. |
| 257 |
setpr103.zip |
30-09-2013 |
381 Kb. |
0 |
SetPriority Version 1.03 (c) 1993, 1994, 1995
Jens Glathe, Scott Dudley. This is a utility to
start a program at a defined priority. It is
also able to start a VDM (DOS-session) at a
defined priority. It is open source software
under the GNU GPL license. Binaries and source
code. |
| 258 |
setproc.zip |
29-12-2004 |
19 Kb. |
0 |
Set CPU on or off. Let you to take your CPU
offline (or online) on SMP systems. |
| 259 |
shmem.zip |
22-05-2002 |
172 Kb. |
0 |
shmem.exe version 1.4. Display/Eat shared memory
(OS/2 32-bit, incl source). Copyright (c) 2002
Fsys Software, Jan van Wijk. |
| 260 |
shmemmon.zip |
21-05-2002 |
40 Kb. |
0 |
shmemmon.exe version 1.1. Monitor shared memory
(OS/2 32-bit, incl source). Copyright (c) 2002
Fsys Software, Jan van Wijk. |
| 261 |
shutk102.zip |
28-10-2003 |
8 Kb. |
0 |
Shutkill Version 1.02. (C) Alex Taylor.
Command-line program to manipulate eCS shutdown
"kill list". The enhanced eComStation shutdown
(part of eStyler) includes a undocumented
automated process-killer. Any executable program
which is listed in eStyler's "kill list" will be
automatically killed (forced to terminate), if
it is running, during shutdown. (This is useful
for programs which may hang or generate annoying
prompts which prevent a smooth shutdown.)
SHUTKILL is a REXX program which allows you to
view and/or modify kill list from the command
line. |
| 262 |
sid075a1.zip |
16-11-2004 |
38 Kb. |
0 |
SystemInformationDisplay/2 v0.7.5. Copyright (c)
2004 by Terje Flaaronning. Full information
about processes, threads, semaphores, modules
and files and their current dependencies. |
| 263 |
sizer.zip |
20-03-2007 |
16 Kb. |
0 |
Sizer v 0
A simple utility which sets VIO
session dimensions, position,
font size etc.
Just start sizer.exe for details. |
| 264 |
sizer002.zip |
29-10-2007 |
16 Kb. |
0 |
Sizer v 0.0.2
A simple utility which sets VIO
session dimensions, position,
font size etc.
Just start sizer.exe for details. |
| 265 |
sl-106.zip |
15-07-2018 |
341 Kb. |
0 |
System Load v1.0.6. Copyright (c) 2015-2018,
Vasilkin Andrey. All rights reserved. SystemLoad
can monitor the status of various system
components on OS/2 and eCS. It is a modular
platform to display different data sets. The
goal of this project is to provide a simple
monitor tool for displaying dynamic information.
The feature set can be expanded with the help of
dynamically loaded modules. To create your own
modules take a look at the available source
codes of already present modules and the
examples. The information is presented as a list
of items and a details pane. Each module defines
itself how the items and the details pane
interior will be drawn. Note that you can drag
and drop fonts and colors onto the list, items
and details pane. WarpIN archive. |
| 266 |
sl103.zip |
04-05-2017 |
290 Kb. |
0 |
System Load v1.0.3. System load monitor by
Andrey Vasilkin. SystemLoad can monitor the
status of various system components on OS/2 and
eCS. It is a modular platform to display
different data sets. The goal of this project is
to provide a simple monitor tool for displaying
dynamic information. The feature set can be
expanded with the help of dynamically loaded
modules. To create your own modules take a look
at the available source codes of already present
modules and the examples. The information is
presented as a list of items and a details pane.
Each module defines itself how the items and the
details pane interior will be drawn. Note that
you can drag and drop fonts and colors onto the
list, items and details pane. WarpIN package. |
| 267 |
sl103rc2.zip |
22-06-2016 |
302 Kb. |
0 |
System Load v1.0.3 RC 2. System load monitor by
Andrey Vasilkin. Monitors the status of various
system components. Modular platform to display
different data sets. |
| 268 |
smartmon.zip |
10-04-2005 |
41 Kb. |
0 |
HDD S.M.A.R.T. monitor v 1.55 (OS/2-32, MetaWare
High C/C++, SYSLOG). IDE HDD S.M.A.R.T. monitor.
An OS/2-based S.M.A.R.T. monitor which resembles
the famous HDDSPEED package. Includes
temperature monitoring, SYSLOG output and
failure prediction features. Created by Andrew
Belov |
| 269 |
smrtls66.zip |
24-04-2017 |
1360 Kb. |
0 |
S.M.A.R.T. disk monitoring tools v6.6r4424 for
OS/2. The smartmontools package contains two
utility programs (smartctl and smartd) to
control and monitor storage systems using the
Self-Monitoring, Analysis and Reporting
Technology System (S.M.A.R.T.) built into most
modern ATA and SCSI hard disks. In many cases,
these utilities will provide advanced warning of
disk degradation and failure. |
| 270 |
so_10.zip |
11-09-2010 |
189 Kb. |
0 |
SO! 0.10 (c) KIV without Co. Utility to get info
about processes, kill them and to do other stuff
(can be viewed as very enhanced GO! by Carsten
Wimmer). Author: Igor V. Krassikov. WarpIN
archive. |
| 271 |
soundpal.zip |
25-11-2000 |
15 Kb. |
0 |
SOUNDPAL.EXE v1.2 Copyright (c) 1998 by Thomas
Nolte. SoundPalette - Programm zum Sichern und
Eintragen der manuell zugeordneten
Systemklaenge. Das Programm sichert die
Einstellung der Systemklaenge in der Datei
'soundpal.ini'. Diese mua sich im gleichen
Verzeichnis befinden! Ueber den Parameter /R
koennen die gesicherten Einstellungen wieder in
die MMPM.INI eingetragen werden. |
| 272 |
sp105.zip |
01-04-2017 |
171 Kb. |
0 |
SetPriority Version 1.05 (c) 1993-1996 Jens
Glathe, Scott Dudley. This is a utility to start
a program at a defined priority. It is also able
to start a VDM (DOS-session) at a defined
priority. Open source software, GNU GPL license.
Binaries and source code. Cleaner version of
SetPriority_1-03.zip, version number of
unchanged v1.04 EXEs upgraded (patched) to
v1.05, name of archive upgraded to v1.05,
several superfluous files and outdated required
EMX DLL removed, EXEs in main directory are now
v1.05 instead of v1.03. |
| 273 |
stmonw18.zip |
15-11-2004 |
270 Kb. |
0 |
StHWMon 0.18a. Temp/Fan/Voltage monitor.
Requires Warp 4 FP#6 or later. WPI File.
Freeware. Author Stefan Milcke. |
| 274 |
stmonz18.zip |
15-11-2004 |
259 Kb. |
0 |
StHWMon 0.18 Temp/Fan/Voltage monitor
Bentigt Warp 4 FP#6 oder hher
Freeware
Datum vom 15.11.2004 |
| 275 |
strt10b1.zip |
03-02-2007 |
50 Kb. |
0 |
Starter Version 1.0 beta1. This program can
start an other program with the same basename as
the starter but with the extension .bin. Before
the child program is executed, BEGINLIBPATH is
set to the directory the starter program has
been executed from. An existing BEGINLIBPATH is
preserved, the new path is added in front of the
existing paths. Author: Heiko Nitzsche. |
| 276 |
strtb132.zip |
22-09-2003 |
104 Kb. |
0 |
(v1.32) STARTB - VIO FAPI program - FREEWARE
STARTB allows you to start DOS and OS/2
programs out of DOS and OS/2 sessions
both asynchronously and synchronously!
Unlike with the OS/2 built-in start command
or other start utilities, all features of the
DosStartSession API are implemented in one
single program for OS/2 and DOS. English,
german and french National Language Support.
Author: C.Langanke <cla@clanganke.de> |
| 277 |
suntan67.zip |
10-09-2018 |
8919 Kb. |
0 |
Suntan Special version 0.67. Suntan Special Web
edition. Suntan Special creates a well
configured workstation or server by installing
sequences of fixes, patches, drivers and
applications to your OS/2 or eComStation
computer. Suntan Special also helps to keep your
system up to date by downloading upgrades to
your system and its applications. Copyright by
Blonde Guy. |
| 278 |
swlist.zip |
27-07-1998 |
23 Kb. |
0 |
OS/2 Window / Switch-list dump version 1.01.
Copyright (c) 1998 Jan van Wijk. List entries in
the OS/2 switch-list structures (Window list).
Source included. |
| 279 |
sysb095.zip |
22-04-2004 |
630 Kb. |
0 |
Sysbench 0.9.5 OS/2 Benchmarking tool. Includes
PM Grpahics, DIVE, CPU Integer and floating
point, Disk and File I/O, memory, and CD ROM
benchmarks. |
| 280 |
sysb095d.zip |
08-08-2008 |
682 Kb. |
0 |
Sysbench 0.9.5d OS/2 Benchmarking tool. Includes
PM Grpahics, DIVE, CPU Integer and floating
point, Disk and File I/O, memory, and CD ROM
benchmarks. |
| 281 |
sysi0826.zip |
07-07-2008 |
905 Kb. |
0 |
SysInfo/2 v0.8.26. Copyright (c) Alexey S.
Smirnov, Yuri Prokushev, 1999-2004, 2007. All
rights reserved. SysInfo.exe OS/2 PM System
Information utility, a ground-up clone of the
Symantec NU for Win 95/NT SysInfo concept.
SysInfo/2 is a useful PM tool for any person who
wants to know more about their machine and
understand how OS/2 uses the hardware resources
of their PC. |
| 282 |
sysi1102.zip |
13-11-2013 |
451 Kb. |
0 |
SysInfo/2 v0.9.0 (test preview). Copyright (c)
1999-2004, Alexey Smirnov, Yuri Prokushev.
Copyright (c) 2012-2013, Yury Larin, eCo
software. All rights reserved. SysInfo.exe OS/2
PM System Information utility, a ground-up clone
of the Symantec NU for Win 95/NT SysInfo
concept. SysInfo/2 is a useful PM tool for any
person who wants to know more about their
machine and understand how OS/2 uses the
hardware resources of their PC. |
| 283 |
sysin820.zip |
04-03-2003 |
1477 Kb. |
0 |
PM System Info tool(Many new futures. See
README.ENG for details). PM System Info tool - a
self-made OS/2 clone of Symantec SystemInfo tool
from NU for Win 95/98/NT |
| 284 |
sysver10.zip |
20-09-2003 |
6 Kb. |
0 |
SYSVER.CMD v1.0 - SYSVER is a REXX program to
display information from an OS/2 SYSLEVEL file
in a simple and readable format. SYSVER.CMD is
(C) 2003 Alex Taylor, and is placed in the
public domain. |
| 285 |
termo.zip |
22-04-2006 |
604 Kb. |
0 |
ACPI temperature monitor (alpha version of
temperature monitor) |
| 286 |
testlog.zip |
22-03-2012 |
9 Kb. |
0 |
TESTLOG version 2.2. Written by David Azarewicz.
Create a log file to submit with a bug report.
Create a log file that you can submit with your
test results when reporting a problem with a
driver. This is a REXX script which collects all
the data about your system and the driver under
test, and puts it into a single log file with
appropriate dividers between the sections in the
file. The script also zips the log file into a
zip file so that you have a smaller file to
attach to an email. Currently collects data for
uniaud, genmac, sane, acpi, MultiMac. Other
drivers may be added in the future. |
| 287 |
top214.zip |
06-01-2018 |
46 Kb. |
0 |
TOP V2.14 by Paul Ratcliffe
OS/2 VIO application to monitor CPU usage by
process. It does NOT impose an artificial
load on the system to generate usage
statistics. The process list can be sorted
according to various criteria (including CPU
percentage, name, threads), and any process
from the list can be selected to be killed. |
| 288 |
tposd109.zip |
18-09-2009 |
121 Kb. |
0 |
PMTPOSD2 version 1.09. On Screen Display utility
for most Thinkpad laptops. Utility to display
the current settings for several Thinkpad BIOS
related settings like: Speaker volume and
muting, LCD brightness, Monitor selection
VGA/LCD/DUAL. Pops up a small dialog at the
bottom/center of the screen with the relevant
info any time one of the monitored values
changes, usually due to the user operating a
special Thinkpad key. F1 with dialog up gives
help, F3 quits completely. Includes sources and
Openwatcom makefile. |
| 289 |
tposd_a1.zip |
08-03-2003 |
42 Kb. |
0 |
TPOSD - ThinkPad On Screen Display for
eComStation Alpha 1. |
| 290 |
tstlg218.zip |
27-02-2017 |
7 Kb. |
0 |
testlog Version 2.18. Create a log file to
submit with a bug report. Written by and
Copyright (c) 2010-2017 David Azarewicz. Create
a log file that you can submit with your test
results when reporting a problem with a driver.
This is a REXX script which collects all the
data about your system and the driver under
test, and puts it into a single log file with
appropriate dividers between the sections in the
file. The script also zips the log file into a
zip file so that you have a smaller file to
attach to an email. Currently collects data for
uniaud, genmac, sane, acpi, r8169, nveth,
e1000e, panorama, usb, ahci, jfs. Other drivers
may be added in the future. |
| 291 |
tstlg320.zip |
10-09-2018 |
105 Kb. |
0 |
testlog Version 3.20. Generate a diagnostic test
log. Copyright (c) 2010-2018 David Azarewicz.
Create a log file that you can submit with your
test results when reporting a problem with a
driver. This program collects all the data about
your system and the driver under test, and puts
it into a single log file with appropriate
dividers between the sections in the file.
Driver must be specified and can be one of the
following: acpi ahci disk e1000 genmac jfs mm
nveth panorama sane snap uniaud usb generic
printer network dos TestId is optional and can
be any short string (max 15 characters). This
string gets added to the end of the log file
name. Do not type a TestId unless you are
producing multiple logs with the same name on
the same day. WarpIN installer. |
| 292 |
tstlog14.zip |
01-06-2010 |
6 Kb. |
0 |
TESTLOG: version 1.4. Written by David
Azarewicz. Creates a log file to submit with a
bug report. Creates a log file that you can
submit with your test results when reporting a
problem with a driver. This is a REXX script
which collects all the data about your system
and the driver under test, and puts it into a
single log file with appropriate dividers
between the sections in the file. Currently
collects data for uniaud or genmac. |
| 293 |
typ_os2.zip |
13-08-2004 |
533 Kb. |
0 |
Typ_OS2 version of 13.08.2004. Filetype
recognition/archivelister program to show used
compiler/packer/crypter, display content of many
archive and selfextractors, partition table
(+errors), boot sectors, bios password and
chipset, support for files greater than 2 GiB,
create some unpack/extract batch files.
userfriendly background search, configuration
program. Created by Veit Kannegieser |
| 294 |
tzset05a.zip |
16-04-2014 |
58 Kb. |
0 |
TZSet: set the time zone from the TZ environment
variable. Current version: 05A. Author: Peter
Moylan. This program is freeware. To the best of
my knowledge it works correctly, but it comes
with no guarantees. Source code is included in
the package. One of the very strange omissions
in OS/2 is any provision for setting your time
zone as part of the system settings. |
| 295 |
tzset08.zip |
01-10-2017 |
77 Kb. |
0 |
TZSet: set the time zone from the TZ environment
variable. Current version: 08. Author: Peter
Moylan. This program is freeware. To the best of
my knowledge it works correctly, but it comes
with no guarantees. Source code is included in
the package. One of the very strange omissions
in OS/2 is any provision for setting your time
zone as part of the system settings. |
| 296 |
um51.zip |
02-04-2011 |
2396 Kb. |
0 |
UniMaint Version 5.10.23 Level 2001155.
Copyright (c) 1999-2011 Sierra HyperStar
Software. All rights rreserved. UniMaint
provides a unified suite of utilities designed
to allow you to maintain your OS/2 Workplace
Shell, including automated repair of INI files,
facilities for displaying and editing EAs,
Desktop backup and restore, and portable Desktop
backups which allow the user to port the Desktop
to another machine or version of OS/2. The
Software is owned and copyrighted by Jim Read,
an individual and the author of FileStar/2, and
is published by Sierra HyperStar Software, a
company exclusively owned by Jim Read. Now
released for free. |
| 297 |
um_51032.zip |
27-06-2011 |
2313 Kb. |
0 |
UniMaint Version 5.10.32. Copyright (c)
1999-2011 Jim Read. All Rights Reserved.
UniMaint provides a unified suite of utilities
designed to allow you to maintain your OS/2
Workplace Shell, including automated repair of
INI files, facilities for displaying and editing
EAs, Desktop backup and restore, and portable
Desktop backups which allow the user to port the
Desktop to another machine or version of OS/2.
The Software is owned and copyrighted by Jim
Read, an individual and the author of
FileStar/2, and is published by Sierra HyperStar
Software, a company exclusively owned by Jim
Read. Now released for free. |
| 298 |
um_wpi.zip |
27-06-2011 |
2361 Kb. |
0 |
UniMaint Version 5.10.32. Copyright (c)
1999-2011 Jim Read. All Rights Reserved.
UniMaint provides a unified suite of utilities
designed to allow you to maintain your OS/2
Workplace Shell, including automated repair of
INI files, facilities for displaying and editing
EAs, Desktop backup and restore, and portable
Desktop backups which allow the user to port the
Desktop to another machine or version of OS/2.
The Software is owned and copyrighted by Jim
Read, an individual and the author of
FileStar/2, and is published by Sierra HyperStar
Software, a company exclusively owned by Jim
Read. Now released for free. WarpIN archive. |
| 299 |
unix2dos.zip |
25-01-2010 |
50 Kb. |
0 |
unix2dos v4.1.2 for OS/2. Unix2dos converts text
files in UNIX format to DOS format. Unix2dos has
a few conversion modes similar to unix2dos under
SunOS/Solaris. In DOS/Windows text files line
endings exist out of a combination of two
characters: a Carriage Return (CR) followed by a
Line Feed (LF). In Unix text files line endings
exists out of a single Newline character which
is equal to a DOS Line Feed (LF) character. |
| 300 |
unstuck.zip |
23-03-2015 |
23 Kb. |
0 |
Stuck pixel-fixing software. Tries to repair
stuck, i.e. not dead, pixels by rapidly turning
selected pixels on and off. |
| 301 |
upd258b3.zip |
04-09-2006 |
1495 Kb. |
0 |
UpdCD 2.58 beta 3. This is a fix release which
has to be applied on top of UpdCD 2.50 Please
download and install UpdCD 2.50 before using
UpdCD 2.55. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, CP 1/2 or eCS 1.x installation
CD-ROM. Created by Zsolt Kadar |
| 302 |
updcd202.zip |
07-04-2002 |
144 Kb. |
0 |
UpdCD 2.02. Requires UpdCD 2.0 installation.
Update OS/2 installation CD-ROM with fixpaks.
This program can be used to incorporate fixpaks
and updates into an OS/2 (Warp 3/4, WSeB, CP,
eCS) installation CD-ROM. By Zsolt Kadar |
| 303 |
updcd203.zip |
11-05-2002 |
466 Kb. |
0 |
UpdCD 2.03 Release. Requires UpdCD 2.0
installation. Update OS/2 installation CD-ROM
with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
(Warp 3/4, WSeB, CP, eCS) installation CD-ROM.
By Zsolt Kadar |
| 304 |
updcd221.zip |
15-07-2002 |
248 Kb. |
0 |
This is a fix release which has to be applied on
top of UpdCD 2.2 Please download and install
(unzip) UpdCD 2.2 in a directory before using
UpdCD 2.21. |
| 305 |
updcd222.zip |
01-09-2002 |
283 Kb. |
0 |
This is a fix release which has to be applied on
top of UpdCD 2.2 Please download and install
(unzip) UpdCD 2.2 in a directory before using
UpdCD 2.22. |
| 306 |
apmswtch.zip |
19-09-2001 |
18 Kb. |
0 |
ApmSwitch, turn APM on or off. By Timo Maier |
| 307 |
auboot22.zip |
23-12-2001 |
123 Kb. |
0 |
Make Aurora bootable CD v2.2 |
| 308 |
bootcd.zip |
16-02-2002 |
5 Kb. |
0 |
This script can be used to create a bootable CD
with enough facilities to fully manage and recov
your system. It contains support for LVM, HPFS,
JFS, FAT32 and CD. The total space occupied is
less than five MB! |
| 309 |
btAbl2_5.zip |
13-09-2002 |
32 Kb. |
0 |
Boot Able v2.5 is a script to create a
maintenance partition or a bootable CD.
This partition/CD supports enough facilities
to fully manage and recover your system. It
contains support for LVM, HPFS, JFS, FAT32,
UDF (turned-off by default), and the CD file
system. The total space occupied is less than
five MB for a command-line version! |
| 310 |
cdb2v150.zip |
21-06-2001 |
363 Kb. |
0 |
CD Boot/2 V1.50 for OS/2 Copyright (C) by Roman
Stangl June, 2001 CD Boot/2 is a utility to
enhance bootable OS/2 CD-ROMs so that when the
CD-ROM is inserted into the drive, a menu is
displayed immediately after BIOS has started
booting from it. F |
| 311 |
cdb2v200.zip |
24-05-2002 |
368 Kb. |
0 |
CD Boot/2 V2.00 for OS/2
Copyright (C) by Roman Stangl April, 2002
CD Boot/2 is a utility to enhance bootable OS/2
the CD-ROM is inserted into the drive, a menu is
after BIOS has started booting from it. From tha
to press the spacebar to continue booting from t
or if the customizeable period expires, the boot
booting from the first harddisk instead.
This is helpful if you want to create a single b
installation CD-ROM (in contrast to the 2 CD-ROM
ships with Aurora, Aurora and Merlin Convenience
want to manually take care of removing the CD-RO
subsequent reboots during OS/2 installation.
You can also use it to enhance FAT-based non-OS/
(like e.g. DOS, WIN9x, WIN NT, W2K) with some li
You are allowed to freely use, enhance or redist
if you don't strip anything, please see the onli
details!
This package is provided as-is, I shall not be h
damages!
Source code is included in (an encrypted, run
"protect cdboot2v200 Source.zie" to decrypt it)
For more detailed information, please take a loo
http://www.geocities.com/SiliconValley/Pines
or the shorter alias: |
| 312 |
cfgmt105.zip |
02-01-2002 |
443 Kb. |
0 |
ConfigMaint/2' v1.05 - This is a free CONFIG.SYS
analyzer / optimizer / information tool for
OS/2 PM. |
| 313 |
cfgt100f.zip |
17-11-2001 |
88 Kb. |
0 |
Fix for ConfigCompare. There is bug in ConfigCom
are (part of ConfigTool 1.0.0) (after a session
of comparing and updating, program deletes CONFI
file). Download this fix and unzip to ConfigTool
directory. |
| 314 |
cfgt110.zip |
26-02-2002 |
1055 Kb. |
0 |
ConfigTool 1.1.0 - CONFIG.SYS editor with
searchable database and language support.
ConfigTool is CONFIG.SYS editor with
searchable database which explains the
entries, sort and checking routines,
boot/recovery options and suggestions
for optimization. By Goran Ivankovic
and Klaus Staedtler. |
| 315 |
cfgtdat2.zip |
12-08-2001 |
565 Kb. |
0 |
Update for Configtool Updated database for Confi
tool, now 1283 entries |
| 316 |
cfgtl120.zip |
30-09-2002 |
1096 Kb. |
0 |
ConfigTool 1.2.0 - CONFIG.SYS editor with
searchable database and language support.
ConfigTool is CONFIG.SYS editor with
searchable database which explains the
entries, sort and checking routines,
boot/recovery options and suggestions
for optimization. Language: English.
Croatian, French, German, Swedish and
Russian are in seperate language pack
cfgt120l.zip. |
| 317 |
chkinipm.zip |
27-05-2002 |
206 Kb. |
0 |
Presentation Manager interface to Henk Kelder's
Checkini.exe |
| 318 |
clninipm.zip |
27-05-2002 |
116 Kb. |
0 |
Presentation Manager interface to Carsten
Arnold's Cleanini.exe |
| 319 |
clrclip.zip |
23-05-2002 |
25 Kb. |
0 |
ClearClip 1.0. Utility for clearing OS/2
clipboard |
| 320 |
confed18.zip |
29-05-2001 |
168 Kb. |
0 |
ConfigEdit/2 v1.8 ==============================
= A PM util that auto-generates your config.sys
from a Data Base of lines. Can handle multiple
config.sys files and/or different kind of data,
manage OS/2's Reco |
| 321 |
countmem.zip |
29-06-2001 |
7 Kb. |
0 |
Shows how much RAM is visible to OS/2. The purpo
e of this program is to check if OS/2 detects
all the installed RAM. |
| 322 |
cppal030.zip |
16-11-2001 |
55 Kb. |
0 |
on-the-fly codepage switcher for PM apps. Use
drag and drop to query and change the codepages
used by open PM apps. Set the "Process" CP to
either value in config.sys, and the "PM" CP
to any of the 100+ CPs included in country.sys.
Released under the |
| 323 |
cpubrn14.zip |
30-09-2001 |
30 Kb. |
0 |
CPUBurn 1.4. Stability tests for CPU (burnP5,
burnP6, burnK6, burnK7) and cache/chipset/RAM
(burnMMX, burnBX). Ported from Win32/Linux sourc
s. Additional requirements: emx 0.9d. |
| 324 |
cpuident.zip |
22-04-2004 |
171 Kb. |
0 |
CPU and hardware identification code 11th March
2004. Updated with new P4/AMD64 processor model
numbers. Added code to recognise Intel's new
cache definition fields. |
| 325 |
cssu010.zip |
12-12-2001 |
127 Kb. |
0 |
Cisco 700 series setup utility 0.1.0 (08.04.2001
Cisco 700 series setup utility 0.1.0 (08.04.2001
(c) copyrighted FREEWARE under GPL This program
can be used to automatically set time/date in
a Cisco 700 series ISDN router plus a few admins
ration |
| 326 |
delay.zip |
11-10-2005 |
5 Kb. |
0 |
DELAY driver version 2.2. This is a simple OS/2
device driver for providing a timed delay during
system startup from CONFIG.SYS. It is useful in
situations where several machines are being
brought up at the same time, but some must not
proceed past a certain point until others are
fully functional. It is also very useful when a
message from some device driver scrolls by on
the screen too fast to be read or analyzed.
Copyright (c) R D Eager 2005. |
| 327 |
drive100.zip |
17-11-2001 |
27 Kb. |
0 |
Drive Information V1.00. This is a quick and
easy way to see how full your hard disks are!
The dialog will enumerate all accessible drives
above C:. |
| 328 |
dskdcmps.zip |
17-10-2001 |
7 Kb. |
0 |
Decompress compressed dsk files (used with dskxt
ct). This file provides the capability to decomp
ess compressed dsk files. It is intended as
a companion to dskxtrct. Compressed dsk files
is one capability that dskxtrct was never writte
to handle. W |
| 329 |
dskinst.zip |
09-01-2002 |
1428 Kb. |
0 |
DSK4PM. DSK4WARP, IMG2ARDI Version 4.22. German
version Copyright (C) Daniel F Valot 1991-2002.
Building diskettes from LOADDSK, EMT, MIF or
DISKIMGE image files. |
| 330 |
dskinste.zip |
09-01-2002 |
1236 Kb. |
0 |
DSK4PM. DSK4WARP, IMG2ARDI Version 4.22. English
version Copyright (C) Daniel F Valot 1991-2002.
Building diskettes from LOADDSK, EMT, MIF or
DISKIMGE image files. |
| 331 |
dtbackup.zip |
31-12-2001 |
19 Kb. |
0 |
Simple backup of the OS/2 desktop |
| 332 |
fs.zip |
14-04-2002 |
24 Kb. |
0 |
FS is an OS/2 command line utility that shows
the free and total space on each partiton
starting with the C: drive or partition. |
| 333 |
hibertkt.zip |
28-08-2001 |
389 Kb. |
0 |
Hibernation Toolkit v 2.0 - A set of patches
to enhance the hibernation, trapdoor and dedicat
d session support in OS/2 Warp. WARNING: experim
ntal version! By Andrew Belov |
| 334 |
hiew676.zip |
20-09-2001 |
692 Kb. |
0 |
HIEW Release 6.76. executable files for Win32,
OS/2 & DOS, view files any length in text, hex,
decode modes, Pentium-III(R) & AMD 3DNow!(R)
dissasembler & assembler, support new executable
format file, NE, LE, LX, PE, ELF... (c) SEN
Kemerovo 2001 |
| 335 |
informer.zip |
05-11-2002 |
33 Kb. |
0 |
Small utility for getting system information.
Could work like screen saver or Cgi. By Alex
Gankov |
| 336 |
ipt120.zip |
11-12-2001 |
95 Kb. |
0 |
InProTrack' v1.20 - PM frontend shows installed
components (retrieved from syslevel and other
system config files). Very fast. Freeware. |
| 337 |
irqmon11.zip |
11-06-2001 |
20 Kb. |
0 |
IRQ Monitor for OS/2 Presentation Manager IRQ
monitor is a program for the OS/2 Presentations
manager, which displays the use of the hardware
IRQ's. |
| 338 |
it8705f.zip |
17-03-2002 |
5 Kb. |
0 |
Monitoring tool for ITE8705/SiS950 chips |
| 339 |
j13replc.zip |
28-01-2002 |
16 Kb. |
0 |
OS/2 Warp 4, Warp Server for e-Business and
also eComStation comes with two different
Java Runtimes. First is IBM Java 1.1.8 and
second is IBM Java2 1.3. Currently it's not
possible to deinstall Java 1.1.8 and use the
1.3 Runtime alone, because some systemparts
require Java 1.1.8. This archive contains
replacement files to execute the Logical
Volume Manager and TCPIP 4.3 under JDK 1.3. |
| 340 |
kill-fe.zip |
22-06-2001 |
139 Kb. |
0 |
Kill-Frontend. This is a graphical user interfac
(GUI) for a program that can "kill" a running
process (i. e. a running program or application)
The program that actually will kill a process
is not included into this front-end - it has
to be on the |
| 341 |
ktaskmgr.zip |
30-06-2001 |
154 Kb. |
0 |
kTaskMgr v0.0.4 alpha preview by knut st. osmund
en. kTaskMgr is a nice little tool which will
present information on OS/2, processes mainly
using the DosQuerySysState API. This currently
includes information on processes, modules and
open files. It |
| 342 |
lock.zip |
16-06-2001 |
22 Kb. |
0 |
System Lock/2, (*) 1997 by MAD DED - II. |
| 343 |
lockupwd.zip |
02-04-2002 |
19 Kb. |
0 |
OS/2 PM Lockup Password Recovery (w/ sources) |
| 344 |
lvmgui.zip |
21-01-2002 |
4 Kb. |
0 |
Runs LVMGui under JDK 1.3 .Copyright (c) Frank
Ambacher 2002 |
| 345 |
lxfix001.zip |
16-10-2001 |
45 Kb. |
0 |
Fix import-by-ordinals in LX executables. This
tool will help those who tries to use together
programs requiring different versions of z.dll,
png.dll and so on. It replaces all imports by
ordinals with imports by names, thus you will
need just one DL |
| 346 |
makefi.zip |
15-08-2001 |
62 Kb. |
0 |
Display and rebuild fi.ini |
| 347 |
mem.zip |
22-05-1999 |
3 Kb. |
0 |
MEM utility. Users of OS/2 are sometimes unsure
about the amount of memory that OS/2 is actually
"seeing"; some BIOSes may mis-report the amount
of memory to OS/2, resulting in OS/2 not
actually using available memory. MEM is a small
program that jus |
| 348 |
memwatch.zip |
10-12-2002 |
222 Kb. |
0 |
Memory Watcher ver 1.2.00 with Source Code. (19
mar 1999) This is a freeware (with source code)
OS/2 memory watcher tool. Copyright (C) 1998
Jostein Ullestad |
| 349 |
mmpmtool.zip |
03-03-2002 |
34 Kb. |
0 |
MMOS/2 IO procedure and Codec maintenance
utility version 0.11 (experimental). This
utility allows you to view and modify the
MMPMMMIO.INI entries. |
| 350 |
nopm01.zip |
22-02-2002 |
49 Kb. |
0 |
noPM/2 - support for OS/2 textmode only systems. |
| 351 |
os2apm.zip |
06-08-2002 |
22 Kb. |
0 |
Command line interface to APM system. Utility
program to issue IOCTL_POWER commands to the
APM driver. Source included. By Stephan Dahl |
| 352 |
pmchklog.zip |
14-07-1997 |
70 Kb. |
0 |
PM Chkdsk Log Formatter - Version 1.3 |
| 353 |
pmhmon15.zip |
25-04-2003 |
29 Kb. |
0 |
PMHMON V 0.15. PMHMON ist einer kleiner
Hardware-Monitor fr den PM. Er protokolliert in
einstellbaren Zeitintervallen die
Betriebsspannungen, sowie die Temperatur von
Motherboard und CPU und berwacht die Drehzahl
der Lfter. Wird ein Grenzwert erreicht, wird
dieser Umstand durch einen Piepser signalisiert.
Das Programm setzt entweder ein zum WinBond
W83781D kompatibles Monitoring-IC oder einen der
VIA-Chips 82C596 oder 82C686 auf dem Board
voraus. Der jeweilige Chip wird automatisch
erkannt und die berwachung gestartet. (c) Peter
Engels |
| 354 |
ptimg061.zip |
23-03-2002 |
5201 Kb. |
0 |
Partition Image 0.6.1 refresh. Partition Image
is a Linux/UNIX utility which saves partitions
in many formats to an image file. The image file
can be compressed in the GZIP/BZIP2 formats to
save disk space, and split into multiple files
to be copied on removable floppies (ZIP for
example), .... The partition can be saved across
the network. Supported file systems: ReiserFS;
ext2fs/ext3fs; FAT16/32; NTFS; JFS; XFS; HPFS;
HFS; UFS. Partition Image will only copy data
from the used portions of the partition. For
speed and efficiency, free blocks are not
written to the image file. Bootimages for
floppies and CD-ROMs. |
| 355 |
pumon2s.zip |
19-02-2002 |
151 Kb. |
0 |
PU Monitor 2.1 build 166
Small yet functional system monitoring tool for
written by Sergey I. Yevtushenko.
It is free and full source code is included.
Features of PU Monitor:
- CPU Usage
- TCP/IP traffic
- Free RAM
- Uptime
- POP3 mailbox checker
- Connection monitor
- Customizable look and feel.
- Small amount of consumed desktop space.
- Unique 'Attach to Warp Center' feature. |
| 356 |
raread.zip |
21-10-2016 |
50 Kb. |
0 |
RAREAD for OS/2, DOS and Windows NT, version
2.0. Copyright (c) Bob Eager. RAREAD copies a
diskette to a diskette image file. The image
file is not compressed or truncated in any way.
Source code included. |
| 357 |
rawrite.zip |
21-10-2016 |
57 Kb. |
0 |
RAWRITE for OS/2, DOS and Windows NT, version
2.0. Copyright (c) Bob Eager. RAWRITE copies a
diskette image file to a diskette. The image
file can be the same size as a diskette, or
smaller. If the image is smaller, the rest of
the last used track is set to zeros, and the
rest of the diskette is left untouched. Source
code included. |
| 358 |
reloadc.zip |
08-05-2002 |
33 Kb. |
0 |
"Reload Counter" for OS/2 CMD files. What is it?
Basicly a VERY simple program to view a count on
the console (display) of the # of passes made in
a OS/2 batch file. The reason I made this progra
was as a convenient and useful tool for me to
track the # of times Xitami for OS/2 has to
reload. Will work with any OS/2 cmd file. |
| 359 |
standby2.zip |
26-12-2002 |
45 Kb. |
0 |
Standby2 version 0.22 by Yano Takashi. A display
power management utility for OS/2. Turns off the
display immediately from the desktop. Turns off
the display if you not touch keyboard for
timeout minutes. Controls the display's power
from APM. You must enable APM in your BIOS and
OS/2's config.sys. |
| 360 |
sysclr10.zip |
27-08-2001 |
10 Kb. |
0 |
System Colors v1.0. With this app you can easily
customize the Sytem colors for e.g. an entry
filed , the selection background .... Copyright
(c) 2000, Russian Team OS/2. Written by Dmitry
Zaharov |
| 361 |
tcp421fx.zip |
19-05-2001 |
3 Kb. |
0 |
ISSUE: TCPIP 4.21+'s configuration tool will not
run under JDK 1.3. As a result, anyone using JDK
1.3 as their default JDK can no longer run the
TCPIP configuration tool. |
| 362 |
throttle.zip |
26-07-2001 |
36 Kb. |
0 |
CPU Throttle utility v.0.02 for VIA 686A/B by
Lesha Bogdanow. This is a free software. NO
WARRANTY. Use at your own risk. This utility
allows CPU throttling (that is adjusting the
CPU speed and consequently power consumption)
for VIA 686A and 686B so |
| 363 |
tsch114f.zip |
24-02-2002 |
49 Kb. |
0 |
Schedule v1.1.4 vom 31.01.1998, 32 Bit
multithreaded Textmode Scheduler fr OS/2 2.x und
Warp mit remote Steuerung (FREEWARE) |
| 364 |
ttools03.zip |
16-06-2001 |
28 Kb. |
0 |
Tiny system tools for OS/2 (c) 2001 by madded2.
(ps, uptime, reboot and ttelnetd) |
| 365 |
tweak691.zip |
18-10-2001 |
16 Kb. |
0 |
This is tuning utility for VIA Apollo chipset
family. This utility allows to change the values
of some configuration registers of PCI to HOST
bridge based on VT82C691/693A/694X models of
Apollo Pro/133/133A chipset family, that provide
gain in memory |
| 366 |
tzcron10.zip |
03-11-2002 |
8 Kb. |
0 |
This REXX script, TZCRON.CMD, will add itself to
the crontab to be scheduled at the next switch
between standard and daylight savings time, and
when called at the right minute of such a
switch, will change system time including the
time zone offset accordingly. |
| 367 |
unlock.zip |
18-02-2002 |
5 Kb. |
0 |
Tiny files unlocker. Tool for unlocking runned
files (.exe or .dll). Also replaces
hidden/system/read-only file attributes if need.
(c) 2002 by madded2 |
| 368 |
updcd165.zip |
26-06-2001 |
433 Kb. |
0 |
Update your OS/2 installation CD-ROM with fixpak
and updates (version 1.65). Update to UPDCD16.ZI
. |
| 369 |
updcd17.zip |
17-10-2001 |
1235 Kb. |
0 |
Update CD Version 1.7. Update OS/2 installation
CD-ROM with fixpaks This program can be used
to incorporate fixpaks and updates into an OS/2
(Warp 3, 4, WSeB, MCP1) installation CD-ROM. |
| 370 |
updcd18.zip |
21-11-2001 |
1500 Kb. |
0 |
Update CD Version 1.8. Update OS/2 installation
CD-ROM with fixpaks. This program can be used
to incorporate fixpaks and updates into an OS/2
(Warp 3, 4, WSeB, CP) installation CD-ROM. By
Zsolt Kadar |
| 371 |
updcd181.zip |
28-11-2001 |
63 Kb. |
0 |
Update CD Version 1.81. Update OS/2 installation
CD-ROM with fixpaks. This program can be used
to incorporate fixpaks and updates into an OS/2
(Warp 3, 4, WSeB, CP) installation CD-ROM. By
Zsolt Kadar. Requires updcd18.zip. |
| 372 |
updcd199.zip |
16-12-2001 |
143 Kb. |
0 |
UpdCD 1.99 (2.0 alpha) for eCS. This is a very
early alpha version, use it at your own risk!
Install UpdCD 1.81 (1.8 base + 1.81 fix) and
unzip this zip in the updcd directory (overwrite
the original UpdCD files). UpdCD 1.99 is not
able to build othe |
| 373 |
updcd204.zip |
02-06-2002 |
713 Kb. |
0 |
UpdCD 2.04. Requires UpdCD 2.0 installation.
Update OS/2 installation CD-ROM with fixpaks.
This program can be used to incorporate fixpaks
and updates into an OS/2 (Warp 3/4, WSeB, CP, eC
installation CD-ROM. By Zsolt Kadar |
| 374 |
updcd21b.zip |
12-06-2002 |
1879 Kb. |
0 |
UpdCD 2.1 Beta. Update OS/2 installation CD-ROM
fixpaks. This program can be used to incorporate
fixpaks and updates into an OS/2 (Warp 3/4, WSeB
CP, eCS) installation CD-ROM. By Zsolt Kadar |
| 375 |
updcd22.zip |
03-07-2002 |
1887 Kb. |
0 |
Update CD Version 2.2. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
(Warp 3/4, WSeB, CP, eCS) installation CD-ROM.
By Zsolt Kadar |
| 376 |
updcd224.zip |
06-11-2002 |
342 Kb. |
0 |
Update CD Version 2.24. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
(Warp 3/4, WSeB, CP, eCS) installation CD-ROM.
This is a fix release which has to be applied on
top of UpdCD 2.2 Please download and install
(unzip) UpdCD 2.2 in a directory before using
UpdCD 2.24. By Zsolt Kadar |
| 377 |
updcd225.zip |
01-12-2002 |
339 Kb. |
0 |
Update CD Version 2.25. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
(Warp 3/4, WSeB, CP, eCS) installation CD-ROM.
This is a fix release which has to be applied on
top of UpdCD 2.2 Please download and install
(unzip) UpdCD 2.2 in a directory before using
UpdCD 2.25. By Zsolt Kadar |
| 378 |
updcd230.zip |
18-12-2002 |
2039 Kb. |
0 |
Update OS/2 installation CD-ROM with fixpaks
This program can be used to incorporate fixpaks
and updates into an OS/2 (Warp 3/4, WSeB, CP,
eCS) installation CD-ROM. |
| 379 |
updcd232.zip |
10-03-2003 |
192 Kb. |
0 |
UpdCD 2.32. Update OS/2 installation CD-ROM with
fixpaks. This program can be used to incorporate
fixpaks and updates into an OS/2 (Warp 3/4,
WSeB, CP, eCS) installation CD-ROM. Requires
updcd230.zip. |
| 380 |
updcd234.zip |
14-06-2003 |
319 Kb. |
0 |
UpdCD (version 2.34) - Refresh OS/2 or eCS
CD-ROM's with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. This is a fix release which
has to be applied on top of UpdCD 2.30. Please
download and install (unzip) UpdCD 2.30 in a
directory before using UpdCD 2.34. |
| 381 |
updcd235.zip |
09-07-2003 |
332 Kb. |
0 |
UpdCD (version 2.35) Refresh OS/2 or eCS
CD-ROM's with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. This is a fix release which
has to be applied on top of UpdCD 2.30. Please
download and install (unzip) UpdCD 2.30 in a
directory before using UpdCD 2.35. |
| 382 |
updcd236.zip |
24-08-2003 |
335 Kb. |
0 |
UpdCD (version 2.36) Refresh OS/2 or eCS
CD-ROM's with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. |
| 383 |
updcd237.zip |
05-11-2003 |
721 Kb. |
0 |
UpdCD version 2.37. Refresh OS/2 or eCS CD-ROM's
with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. |
| 384 |
updcd239.zip |
05-12-2003 |
1057 Kb. |
0 |
UpdCD version 2.39. Refresh OS/2 or eCS CD-ROM's
with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. |
| 385 |
updcd240.zip |
17-12-2003 |
2580 Kb. |
0 |
UpdCD version 2.40. Refresh OS/2 or eCS CD-ROM's
with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. |
| 386 |
updcd241.zip |
08-02-2004 |
502 Kb. |
0 |
UpdCD 2.41. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 387 |
updcd242.zip |
13-03-2004 |
637 Kb. |
0 |
UpdCD 2.42 beta 3. Refresh OS/2 or eCS CD-ROM's
with fixpaks and updates. Update OS/2
installation CD-ROM with fixpaks. This program
can be used to incorporate fixpaks and updates
into an OS/2 Warp 3/4, WSeB, MCP/ACP and/or eCS
installation CD-ROM. |
| 388 |
updcd243.zip |
24-05-2004 |
735 Kb. |
0 |
UpdCD 2.43. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 389 |
updcd244.zip |
12-07-2004 |
813 Kb. |
0 |
UpdCD 2.44. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 390 |
updcd245.zip |
13-09-2004 |
1038 Kb. |
0 |
UpdCD 2.45. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 391 |
updcd246.zip |
10-10-2004 |
1068 Kb. |
0 |
UpdCD 2.46. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 392 |
updcd247.zip |
06-11-2004 |
1146 Kb. |
0 |
UpdCD 2.47. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 393 |
updcd248.zip |
20-12-2004 |
1159 Kb. |
0 |
UpdCD 2.48. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 394 |
updcd249.zip |
14-03-2005 |
1323 Kb. |
0 |
UpdCD 2.49. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. Update OS/2 installation
CD-ROM with fixpaks. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, MCP/ACP and/or eCS installation
CD-ROM. |
| 395 |
updcd250.zip |
10-05-2005 |
2916 Kb. |
0 |
UpdCD 2.50. Update OS/2 installation CD-ROM with
fixpaks. This program can be used to incorporate
fixpaks and updates into an OS/2 (Warp 3/4,
WSeB, CP, eCS) installation CD-ROM. Created by
Zsolt Kadar |
| 396 |
updcd251.zip |
19-07-2005 |
424 Kb. |
0 |
UpdCD 2.51. Update OS/2 installation CD-ROM with
fixpaks. This program can be used to incorporate
fixpaks and updates into an OS/2 (Warp 3/4,
WSeB, CP, eCS) installation CD-ROM. Created by
Zsolt Kadar |
| 397 |
updcd252.zip |
10-09-2005 |
590 Kb. |
0 |
UpdCD 2.52. Update OS/2 installation CD-ROM with
fixpaks. This program can be used to incorporate
fixpaks and updates into an OS/2 (Warp 3/4,
WSeB, CP, eCS) installation CD-ROM. Created by
Zsolt Kadar |
| 398 |
updcd254.zip |
10-12-2005 |
1469 Kb. |
0 |
UpdCD 2.55 beta 1. This is a fix release which
has to be applied on top of UpdCD 2.50 Please
download and install UpdCD 2.50 before using
UpdCD 2.54. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, CP 1/2 or eCS 1.x installation
CD-ROM. Created by Zsolt Kadar |
| 399 |
updcd255.zip |
29-01-2006 |
1472 Kb. |
0 |
UpdCD 2.55. This is a fix release which has to
be applied on top of UpdCD 2.50 Please download
and install UpdCD 2.50 before using UpdCD 2.55.
Refresh OS/2 or eCS CD-ROM's with fixpaks and
updates. This program can be used to incorporate
fixpaks and updates into an OS/2 Warp 3/4, WSeB,
CP 1/2 or eCS 1.x installation CD-ROM. Created
by Zsolt Kadar |
| 400 |
updcd256.zip |
01-04-2006 |
1484 Kb. |
0 |
UpdCD 2.56. This is a fix release which has to
be applied on top of UpdCD 2.50 Please download
and install UpdCD 2.50 before using UpdCD 2.55.
Refresh OS/2 or eCS CD-ROM's with fixpaks and
updates. This program can be used to incorporate
fixpaks and updates into an OS/2 Warp 3/4, WSeB,
CP 1/2 or eCS 1.x installation CD-ROM. Created
by Zsolt Kadar |
| 401 |
updcd257.zip |
01-05-2006 |
1494 Kb. |
0 |
UpdCD 2.57. This is a fix release which has to
be applied on top of UpdCD 2.50 Please download
and install UpdCD 2.50 before using UpdCD 2.55.
Refresh OS/2 or eCS CD-ROM's with fixpaks and
updates. This program can be used to incorporate
fixpaks and updates into an OS/2 Warp 3/4, WSeB,
CP 1/2 or eCS 1.x installation CD-ROM. Created
by Zsolt Kadar |
| 402 |
updcd258.zip |
20-09-2006 |
1496 Kb. |
0 |
UpdCD 2.58. This is a fix release which has to
be applied on top of UpdCD 2.50 Please download
and install UpdCD 2.50 before using UpdCD 2.58.
Refresh OS/2 or eCS CD-ROM's with fixpaks and
updates. This program can be used to incorporate
fixpaks and updates into an OS/2 Warp 3/4, WSeB,
CP 1/2 or eCS 1.x installation CD-ROM. Created
by Zsolt Kadar |
| 403 |
updcd260.zip |
24-01-2007 |
3315 Kb. |
0 |
UpdCD 2.60. Refresh OS/2 or eCS CD-ROM's with
fixpaks and updates. This program can be used to
incorporate fixpaks and updates into an OS/2
Warp 3/4, WSeB, CP or eCS installation CD-ROM.
Copyright Zsolt Kadar, 2000-2007
CP 1/2 or eCS 1.x installation CD-ROM. Copyright
Zsolt Kadar, 2000-2007 |
| 404 |
updcd261.zip |
25-03-2007 |
135 Kb. |
0 |
UpdCD 2.61. This is a fix release which has to
be applied on top of UpdCD 2.60 Please download
and install UpdCD 2.60 before using UpdCD 2.61.
Refresh OS/2 or eCS CD-ROM's with fixpaks and
updates. This program can be used to incorporate
fixpaks and updates into an OS/2 Warp 3/4, WSeB,
CP 1/2 or eCS 1.x installation CD-ROM. Copyright
Zsolt Kadar, 2000-2007 |
| 405 |
updin12a.zip |
25-04-2003 |
28 Kb. |
0 |
UPDINI 1.2a fr OS/2
Kopiert die OS/2 INIs auf eine RamDisk und
schreibt sie in Abstnden auf die Platte zurck.
Freeware, (c) 1999-2000 Peter Engels |
| 406 |
updsig21.zip |
25-04-2003 |
48 Kb. |
0 |
UPDSIG 2.1 for OS/2. The little tool UpdSig adds
or updates adjustable intervals in at most 10
different signature files for mailers and/or
newsreaders the following line: This OS/2 system
uptime is 0d 5h 23m 45s 437ms. The complete
message text can now be freely chosen. Freeware.
(c) 1999-2001 Peter Engels |
| 407 |
upsdm09d.zip |
13-06-2004 |
159 Kb. |
0 |
UPS Daemon 0.9d for eComStation. This version of
UPS Daemon is for contact closure type
interfaces and supports UPS like APC (simple
signaling), Belkin, Tripplite, IBM, CyberPower,
etc. UPS Monitor Daemon monitors contact closure
type UPS for power fail or low battery alarm and
shuts system down gracefully. VIO program using
very little system resources. |
| 408 |
upsdmn.zip |
23-04-2004 |
140 Kb. |
0 |
UPS Monitor Daemon for contact closure type UPS.
UPS Monitor Daemon monitors contact closure type
UPS for power fail or low battery alarm and
shuts system down gracefully. VIO program using
very little system resources. |
| 409 |
usb_mode.zip |
25-08-2009 |
231 Kb. |
0 |
usb_modeswitch: tool for controlling "flip flop"
mode USB devices. Version 1.0.2a (C) Josua
Dietze 2009. A small mode switching tool for
controlling "flip flop" (multiple device) USB
gear. Update to use eCS2.0 version of USBCALLS. |
| 410 |
usbboot.zip |
12-10-2008 |
12092 Kb. |
0 |
Bootable USB flashdisk. The bootable USB
flashdisk is aimed to repair the PC, to test
eComStation on new hardware, to aggregate system
information. ATTENTION: do this ONLY if you know
how to use DFSee program, else you can damage
the data on your harddrive. If you have several
eComStation computers, then write the image from
the PC which doesn't contain important data.
Some users have lost their harddisks after
experiments with flash disks. |
| 411 |
usbc071.zip |
13-01-2009 |
311 Kb. |
0 |
USB configuration tool beta 0.7.1. This is a
settings notebook designed to reconfigure most
USB settings. It can also be used to add more
Controller lines to the config.sys file should a
user add a USB Host Controller card to the
system. It is not designed to perform the
initial installation of any required drivers,
only reconfigure the installation of those
drivers so the drivers already need to exist in
their default location. Author Peter Brown.
Additional requirements: IBM USB support
installed. |
| 412 |
usbc082.zip |
10-04-2014 |
355 Kb. |
0 |
USB Configuration Notebook Beta 0.8.2. This is a
settings notebook designed to reconfigure most
USB settings. It can also be used to add more
Controller lines to the config.sys file should a
user add a USB Host Controller card to the
system. It is not designed to perform the
initial installation of any required drivers,
only reconfigure the installation of those
drivers so the drivers already need to exist in
their default location. Design and
implementation: Peter Brown. Additional
requirements: IBM USB support installed. |
| 413 |
usbc082w.zip |
10-04-2014 |
325 Kb. |
0 |
USB Configuration Notebook Beta 0.8.2. This is a
settings notebook designed to reconfigure most
USB settings. It can also be used to add more
Controller lines to the config.sys file should a
user add a USB Host Controller card to the
system. It is not designed to perform the
initial installation of any required drivers,
only reconfigure the installation of those
drivers so the drivers already need to exist in
their default location. Design and
implementation: Peter Brown. Additional
requirements: IBM USB support installed. WarpIN
package. |
| 414 |
usbcf075.zip |
16-11-2012 |
353 Kb. |
0 |
eComStation USB Configuration Notebook Beta
Version 0.7.5. Design and Implementation Peter
Brown. Designed to allow easy reconfiguration of
USB drivers and devices. Additional
requirements: IBM USB support installed. |
| 415 |
usbcfg7a.zip |
03-08-2006 |
280 Kb. |
0 |
USB configuration tool beta 7a. This is a
settings notebook designed to reconfigure most
USB settings. It can also be used to add more
Controller lines to the config.sys file should a
user add a USB Host Controller card to the
system. It is not designed to perform the
initial installation of any required drivers,
only reconfigure the installation of those
drivers so the drivers already need to exist in
their default location. Author Peter Brown.
Additional requirements: IBM USB support
installed. |
| 416 |
usbdv097.zip |
28-09-2017 |
456 Kb. |
0 |
USB Device Monitor 0.9.7 with an updated
usb.ids. It reports information of your attached
USB devices on OS/2. It requires the
USBRESMG.SYS driver loaded (not included).
Developed by USBGuy. |
| 417 |
usbmntd.zip |
16-02-2003 |
74 Kb. |
0 |
USBMOUNTD version 0.0.2 is an utility for
automatic mounting of the USB media devices in
OS/2. On plugging a new device to the PC
USBMOUNTD automatically updates the list of the
accessible in OS/2 removable media and assigns
the corresponding drive letter. If drive is
"dirty" usbmountd can check it. Sources
included. |
| 418 |
usbmontd.zip |
24-01-2003 |
69 Kb. |
0 |
USBMOUNTD is an utility for automatic mounting
of the USB media devices in OS/2. On plugging a
new device to the PC USBMOUNTD automatically
updates the list of the accessible in OS/2
removable media and assigns the corresponding
drive letter. Sources included. |
| 419 |
usbres.zip |
20-04-2002 |
319 Kb. |
0 |
OS/2 USB Resource Manager version 0.9.7 (beta).
The purpose of this driver is to show all
connected USB devices with exception of USB-hubs
connected to the system. It allows to view the
USB Device Report and can thereby help a develop
to see how a device registers at the system and
to find reasons why a certain device which shoul
run with installed drivers doesn't or in the
development of new drivers. |
| 420 |
usbwarn.zip |
06-08-2012 |
2 Kb. |
0 |
USBWarn v1.00. Copyright (c) 2008-2012 W. M.
Brul. Open USB Stick for eComStation 2.0. Opens
the drives folder automatically after insertion
of the usb stick. The program USBWARN.EXE
executes the accompanying USBWARN.CMD file
automatically upon insertion of a usb stick into
your system. |
| 421 |
usnclmav.zip |
04-06-2008 |
7 Kb. |
0 |
One users method to use ClamAV with eCS (OS/2)
written by Doug Bissett |
| 422 |
utim2mdy.zip |
09-10-2003 |
35 Kb. |
0 |
utime2mdy. Copyright (c) 2000-2003 Steven Levine
and Associates, Inc. All rights reserved.
utime2mdy converts values between date/time
format and unix time format. Values are passed
on the command line. |
| 423 |
vers_121.zip |
01-07-2005 |
9 Kb. |
0 |
A more convenient alternative to the VER and
SYSLEVEL commands. VERSION is a REXX program
that displays SYSLEVEL information for the
current system. By default, it shows summary
information for several common OS/2 components
(as detected), but it can be used to display the
contents of any single SYSLEVEL file. VERSION is
more useful and informative than the VER
command, but much faster and more readable than
the SYSLEVEL command. New in 1.21: product name
in summary output can be customized; some
cosmetic improvements. |
| 424 |
vfdisk20.zip |
14-05-2001 |
43 Kb. |
0 |
Virtual Floppy Disk Driver. Provides a virtual
Floppy Disk. Useful especially when dealing
with diskette images, e.g. when creating bootabl
CDs. VFDISK is a virtual floppy disk device
driver that allows track reading, writing, and
formatting like a |
| 425 |
vollmuel.zip |
10-02-2003 |
16 Kb. |
0 |
VOLLMUELL.EXE - Beschraenken des freien
Festplattenplatzes, Version 2.3 |
| 426 |
vsysinfo.zip |
21-08-2003 |
24 Kb. |
0 |
Small comandline systeminfo created by Fritz
Schori |
| 427 |
waitfor.zip |
14-02-2002 |
33 Kb. |
0 |
Command line wait/delay utility for OS/2 batch &
CMD files. |
| 428 |
wakeup.zip |
19-11-2003 |
9 Kb. |
0 |
Wake up sleeping PCI devices at boot time.
Created by Veit Kannegieser. |
| 429 |
whichdll.zip |
12-03-2006 |
13 Kb. |
0 |
This program reports the full path name
of a DLL.
When multiple instances of a single DLL
are present the program finds which one
is actually used by the system. |
| 430 |
yaos192.zip |
29-11-2013 |
164 Kb. |
0 |
YAOS (Yet Another OS/2 Shell) version 1.9.2,
Original author: LEE, Cjin Pheow (C) 1997.
Current author: Dave Saville (C) 2011-2013. This
is a shell that runs on top of cmd.exe. |
Prev
Home
Index