CONTENTS:

AFCAD file for the London Heathrow EGLL standard FS2002 scenery with 150+ gates! You will see AI aircraft you never saw before. No overlay, single afcad!

Adds gates/parkings, has correct taxiways and dual runway use: 9R/27L for take off, 9L/27R for landing. Correct Tower positioning and elevation. All the gates in the standard scenery are used and the aircraft park exactly at the gate. Several other positions are used to park more aircraft, they are nicely lined up and don't obstruct traffic.

Gate and taxiways numbering is not reallife, but systematic. All gates in the Inner field between both large (9/27) runways are called I-gates (I-1 to I-97), the other gates Outside runway 9R/27L are called O-gates (O-1 to O-54). Taxiways are Inner and Outer, all others are without name (blank).

Total amount of gates: 151, catergorized as follows:
- 54 jet small
- 24 jet medium
- 59 jet large
- 9 General Aviation large (fits prop large and jet micro)
- 5 ramp cargo

INSTALLATION:

Import with AFCAD (Lee Swordy):

1. Unzip and copy the AFCAD file to the main directory of your AFCAD programm.
2. Start AFCAD
3. Choose file-import airport
4. Select my afcad file EGLL_JPJ
5. Choose save
6. When prompted, choose replace.

Then start FS and enjoy.


BACKUP YOUR FILE:

If you want, you can first make a backup of your current AFCAD file for this airport before installing the new one:
1. Start AFCAD
2. Choose open airport and type EGLL
3. Choose export airport, rename the suggested EGLL1 to EGLL_org
4. OK

In case you don't like the new file I provided, you can re-import your original one.



Paul Jordaans
jjordaans@hotmail.com