****************************************
 WINDOW NT 3.51 STation SETUP INFORMATION
****************************************

 Contents

 1.0    Introduction
 2.0    Supported Resolutions
 3.0    Installation Notes for Windows NT Station Version3.51

*******************************************************************

 1.0    Introduction

 The Graphics Device Drivers supplied here are for the Microsoft Window NT
 operating system Station version 3.51.( Update the Winnt original S3 Driver) 

 ******************************************************************

 2.0    Supported Resolutions.

                16 colors       256 colors      65536 colors    16.7 million
 Resolutions    4 bpp           8 bpp           16 bpp          24  bpp

 640*480        1MB/2MB         1MB/2MB         1MB/2MB         2MB
 800*600        1MB/2MB         1MB/2MB         1MB/2MB         2MB
 1024*768       1MB/2MB         1MB/2MB         2MB             N/A
 1152*564       1MB/2MB         1MB/2MB         N/A             N/A
 1280*1024      1MB/2MB         2MB             N/A             N/A
 1600*1200      1MB/2MB         2MB             N/A             N/A

 1MB/2MB - Supported when the display memory is 1MB or 2MB.
 2MB     - Supported only when the display memory is 2MB.
 N/A     - Not Supported

 *******************************************************************

 3.0    Installation Notes for Windows NT Station version 3.51

 The driver for Windows NT 3.51 containing :

 - Oemsetup.inf
 - S3.sys
 - S3.dll

 Procedure :

*1. Start up WinNT Station 3.51 with VGA mode.  

 2. Run the Windows NT Display program located in the Control Panel,main group.

 3. Select "Change Display Type..." button from the Display Settings options.

 4. Select "Change..." button from the Display Type options.

 5. Select "Other(Require a disk from hardware manufacturer)" next to the
    display options.

 6. Directory A:\NT351
 
 7. Restart Windows NT. Windows NT will now use the new drivers.

 8. After Reboot you can find "VGA Chip : S3 Trio64V+" in display program under 
    Control Panel 

 Note : If a color depth or resolution that is not supported by your card is
        selected, Window NT will substitute 640*480, 256 color mode as the
        current display mode.
