Technical Notes of the QUANTUM LPS 240AT REV 05-K Manufacturer: Quantum Model: LPS 240AT Interface IDE/AT Formated Capacity 234 Mb Cylinders 723 Heads 13 Sectors 51 Landing Zone Auto Precomp. N/A RWC Cyl N/A Encoding Method.. RLL1,7 MTBF (HR X 1000).. 250 Form factor.. 3.5" Height 1" Avg seek (ms). 16 Cache 256k IBM AT Drive Type.. * Power Consumption 6W NOTE: Translation to use: 723 Cylinders, 13 heads, 51 sectors/track. Quantum IDE Notes AT DRIVE CONFIGURATION For the IBM PC-AT (r) and compatibles, a master/slave relationship must be established for the hard disk drives on the AT bus. If only one hard drive is installed on the AT bus, it must be configured as the Master drive. If two hard drives are installed on the AT bus, one must be configured as the master and the other as a slave. The drive position on the cable has no effect on the Master/Slave relationship. The jumper settings solely determine the Master/ slave relationship. Master / Slave jumper configurations +---------------------------------+ LPS MODELS: POWER =|o | Front +------------+ =|o +---+ o| of | 120AT, and | | | | | Drive | 240AT | | +---+ | +------------+ C =|1 +---+ |= LED A =| | | | B =| +---+ +--------+ | L =| | | | E =|40 ::::: +--------+ | +---------------------------------+ | Jumper only the following: \ : : : : : Single= DS WS DM SP DS CS / Master= DS / Slave = NONE For Dual Drive