

INSTALLING YOUR DYNALINK MODEM DRIVERS UNDER WIN '95.


To install your Dynalink Modem Drivers under Windows 95 take the disk labelled "DYNALINK WINDOMS '95 MODEM DRIVERS" and place it in your floppy drive then follow the procedure below:


* From the bar click on "START" then choose "SETTINGS, CONTROL PANEL".

* Double click on the "MODEMS" icon.

* Click on "ADD".

* Click on "DON'T DETECT MY MODEM... " so as a tick appears in the blank square, then click on "NEXT".

* Click on "HAVE DISK".

* The Install From Disk screen will appear, type in the drive letter that the disk is in and click on "NEXT".
							(eg: a:\)

* A list of Dynalink Drivers will appear, choose the model of modem you have installed and click on "NEXT".

* Choose the applicable Com Port that the modem was installed on and click "NEXT".

* Win 95 will now install the appropriate drivers for you, once it has completed this, click the "FINISH" button.



The Modem you have just installed should now appear in the Modem Properties box.


Click on "CLOSE" and all is complete!  - CONGRATULATIONS!  You've just set the Drivers up for your Modem under Win 95!!




